[QRD Junior E5] Manual Analog Stick Calibration Guide – qrdgame

[QRD Junior E5] Manual Analog Stick Calibration Guide

How to Enter Manual Stick Calibration Mode

Use this mode if you experience:

  • character drifting

  • camera drifting

  • inaccurate stick response

Steps:

  1. Make sure the controller is powered OFF

  2. Press and hold D-Pad Down (⬇️)

  3. While holding ⬇️, connect the controller to PC / Switch / PS4 via USB-C

  4. When all 4 LEDs turn ON, calibration mode is active

  5. Move both sticks in full circles several times

  6. Disconnect the cable to save and exit

Manual calibration is now complete.

 

Download the V1.02 Firmware